iWell
The Teleport can connect to iWell battries using Modbus TCP over ethernet. The Teleport can also connect iWell’s MQTT Orchestrator API. Teleport can manage the following mode(s) of operation:
- Real Power Dispatch
Connection to iWell Orchestrator through MQTT
The Teleport can connect to iWell batteries through the iWell MQTT Orchestrator. To connect, we need the follwing information from iWell:
- Username and password needed to establish a connection.
DeviceIdof the controlled batteries.- (Optional) Energy Measurement
Producer: If there is a dedicated meter for the battery, the measurements produced by the meter can be used to add more properties (See supported properties below) to the message generated by the Teleport.
Supported properties
Supported properties
batteryStatusenergy.charged(Only available if there is a dedicated meter)energy.discharged(Only available if there is a dedicated meter)frequency(Only available if there is a dedicated meter)activePowerreactivePower(Only available if there is a dedicated meter)stateOfChargeratedEnergyavailableEnergypowerFactor(Only available if there is a dedicated meter)availableActivePower.chargeavailableActivePower.dischargeacVoltageMediumVoltage.phase(Only available if there is a dedicated meter)acCurrentMediumVoltage.phase(Only available if there is a dedicated meter)
Unsupported properties
stateOfHealthavailableReactivePower.absorbavailableReactivePower.injectacVoltageMediumVoltage.lineacCurrentMediumVoltage.linebatteryEnergyStorageSystems[]